Slide Retainers

Slide Retainers Supplier

Slide Retainer products are generally used to hold slides in a mold when the mold design requires a moving core. Slide Retainers help to facilitate accurate and proper movement within the mold.

The sliding retainer is a sturdy and compact product able to guarantee high loading performance and high longevity. The locking is performed with rollers aimed at minimizing wear, the special design allows for setting the locking position.

Slide retainer features

Slide retainer SLLK product features

1. This limit clamp Slide retainer is mainly used for large behavior agencies;

2. The surface contact design is adopted, which reduces the unit pressure of the contact surface, thereby effectively preventing damage to the travel mechanism;

Features of slide retainer RM

1. Simple structure and convenient installation;

2. The load of the slide retainer can be increased by increasing the number of clamps, which can delay the separation and closing of the mold.

Slide retainer RC product features

1. High-quality spring steel;

2. The structure is simple and practical, and the installation space is small.

Slide retainer SRT (British) product features

1. Compared with other Slide retainers, it is not easy to damage the slider of the travel mechanism;

2. The positioning part is a ball structure, which reduces friction compared to a sliding structure; the slider slides smoothly;

Slide retainer SRT/SRTM product features

1. Rugged and durable, precise design;

2. Small size, strong and durable;

Slide retainer SLK-25(50)A product features

1. This product is easy to install into the mold base slider, and is cleverly hidden in the limit decoration;

2. Compared with SLK-8A, its external dimensions are more reasonable. The 90° limit hanging platform is lengthened, which increases its load force and makes the limit more balanced and stable.

Slide retainer SLK-8A product features

1. This product is the smallest in the limited position clamp, which can make full and reasonable use of space;

2. Equipped with a cover plate to make the sliding block and the slide retainer more precise;

3. It can effectively prevent the gradual loosening of the slider;

4. High hardness material, sturdy and durable, long life.

Features of Slide Retainer Z5140

1. Compared with the Slide retainer SLK series, the spring adopts a built-in type, which is more convenient to install;

2. Compared with the Slide retainer Z5130 series, the 90° limit hanging table is lengthened to make the limit more balanced and stable.

Features of Slide Retainer Z5130

1. Integrated design, easy to install;

2. When using this product, you must design and process the V groove on the row template;

3. When processing the mounting screw hole position, it must be at right angles to the hanging table position for maximum effect.

Slide retainer PSR product features

1. The installation is simple, it needs to be equipped with a V slot when applicable, which takes up a small space;

2. It is simple and economical, and strong and durable. It can reach a larger load by increasing the number of products.

Features of Slide Retainer Z189

1. Alloy steel precision casting;

2: Metric standard

Slide retainer MRT product features

1. Alloy precision casting;

2. The pin and jade clamping positions must be concentric during installation;

3. And the Slide retainer screw must not be installed on the main body to lock;

4. Must leave room for activity

Slide retainer PSM PSL product features

1. Precision alloy casting, strong and durable;

2. Slide retainer PSL is in the British system, which can adapt to customer requirements in different countries;

3. It can be used as a clamping buckle when there is no requirement for the clamping sequence;

4. Over-travel design effectively prevents damage caused by inaccurate stroke processing (setting).

Slide retainer series

DME, DME-EOC Slide retainers

PSL0001,

PSM0001,

PSL0002,

PSM0002,

PSL0003,

PSM0003,

PSR1000,

PSR2000,

PSR4000,

DME, DME-EOC Slide retainers

MRT 10M,

MRT 20M,

MRT 40M,

SUPERIOR Slide retainers

SLK-8A,

SLK-08A,

SLK-25A,

SLK-50A,

ZST-08,

ZST-25,

ZST-50

STRACK slide retainers

Z5130-13,

Z5130-18,

Z5130-27,

Z5134-7,

Z5134-10,

Z5134-15,

Z5135-1,

Z5135-2,

Z5136-1,

Z5136-2,

Z5140-0,

Z5140-1,

Z5140-2

HALES slide retainers

MTR 10M,

MTR20M,

MTR40M

PCS slide retainers

SRP-22,

SRP-44,

SRP-88,

RC.123006,

RC.164008,

RC.205010,

RC.246012,

RC.328012,

RC.328016,

RM.651608

DMS slide retainers

SRP-22,

SRP-44,

SRP-88,

NATIONAL slide retainers

SRP-22,

SRP-44,

SRP-88,

CHOICE slide retainers

SRP44,

SRP88,

HASCO slide retainers

Z189/10,

Z189/12,

Z189/16

MEUSBURGER slide retainers

E3044/8,

E3044/12,

E3044/16,

E3046/13,

E3046/18,

E3046/27,

E3048/18/53,

CUMSA slide retainers

RC.123006,

RC.164008,

RC.205010,

RC.246012,

RC.328012,

RC.328016,

RM.651608

MISUMI slide retainers

SRCU12-5;

SRCU16-6;

SRCU20-8;

SRCU24-10;

SRCU32-12;

SRCU32-16;

SLLK16-C;

SLLK16-F;

SLLK20-F;

SLLK20-L;

SRPR16;

SRPR19;

SRPR22;

SRPRH16;

SRPRH19;

SRPRH22;

HALES slide retainers

RC.123006,

RC.164008,

RC.205010,

RC.246012,

RC328012,

RC.328016,

RM.651608

PROGRESSIVE slide retainers

SRT-10,

SRTC-10,

SRT-30,

SRTC-30,

SRT-80,

SRTC-80,

SRTM-04,

SRTMC-04,

SRTM-13,

SRTMC-13,

SRTM-36,

SRTMC-36,

RET- 1

WEMA slide retainers

RCR-10,

RCR-20,

RCR-40,

etc.

DGMF Mold Clamps Co., Ltd’s Slide Retainers are compact and provide positive-acting slide retention.

Slide Retainers are installed behind or below the slide which eliminates interference with machine tie bars.

Multiple units can be used together to provide retention for larger slides.

Compact, economical, and positive-acting slide retention

Can be installed in new molds or retrofitted to existing molds

Installed behind or below the slide, eliminating interference with machine tie bars or safety gates

Multiple units can be used for large or heavy slides

DGMF Mold Clamps Co., Ltd manufactures the mold clamps and supplies the injection mold components, such as Clamps, Toggle Clamps, C Clamps, Pins, Bushings, Positioning Components, Lock Mold Components, Reset Extrusion, Cavity, and Core Components, Coolings, Die Press Components, Punch And Die, Guide Components, Self-lubricating Components, Springs, Machine Tools, Machine Mounts, gate valves, Vises, Fasteners, Lifting, Bolts, Nuts, Washers, etc.

Contact the DGMF Mold Clamps teams for more details about the Positioning Components such as Positioning Components specifications, Positioning Components pricing, Positioning Components inventory, etc.