Positioning Components
Positioning Components Supplier
DGMF Mold Clamps Co., Ltd is the positioning components supplier and mould clamps manufacturer in China.
What is the positioning component?
The purpose of the positioning components of the mold is positioning.
The positioning components (stop nails, baffles) on the side locate and guide the injecting/stamping position of the injection/stamping parts to prevent deviation. The positioning components in the forward direction are positioned to prevent the head from being sent over or not in place.
The positioning components series includes tapered interlocks, mold side locks, top locks, taper block sets, X-series locks, square guide bars, pre-centering units, slide retainers, etc.
Tapered interlock
Mold components tapered interlocks are used for the precise positioning of molds.
The tapered interlock is a mold component used to accurately lock the position between the module and the template in the plastic mold to make the mold work smoothly.
The tapered interlock is a concave-convex combination configuration of the upper positioning block and the lower positioning block.
According to the difference of the convex tapered interlock, it is divided into the oblique tapered interlock and the right-angle tapered interlock.
The lower end of the convex positioning block of the oblique tapered interlock and the right-angle tapered interlock is somewhat according to actual needs. There will be a slot for more accurate positioning.
The tapered interlock is a circular main body component made of mold hot work die steel, which is composed of two sets of positioning blocks.
Material: SCM415, SKD11
Hardness: ±62HRC
Standard error: ±0.05mm
Taper Interlock – DGMF Mold Clamps Co., Ltd is the Supplier of Taper Interlock which provides positive alignment that may not be possible by the leader pins and bushings alone.
Taper Interlocks are made of high-quality tool steel, precision ground tolerances that permit interchangeability.
Taper Interlock provides positive alignment of cavities and cores and between two halves. Extra grind stock is provided at the back of both males and females for positive fitting.
Our taper interlock is known for its fine quality and high efficient working as we use the finest quality raw material. It is widely used to provide alignment between two halves of cavities and cores.
It is precision engineered for smooth functioning and provides extra efficiency with both male and female fittings.
Taper interlock Features
Precision engineered
Works with both male and female fittings
Provides alignment
Quality tested
Mold Side Lock
Side locks are machined on the centerline axis, both vertically and horizontally on the outside of the mold. Lock pockets are machined with both halves of the mold clamped together to ensure parallel location.
The General side lock provides positive alignment for molds with interlocking cavities and cores.
Our slide locks are the original, specially designed to effectively prevent operational slipping off the slide in your mold base.
These components are used for precision alignment of the upper and lower portion of a mold. Side locks consist of two pieces: male and female side locks.
Both Male and Female Side Locks are Precision Ground for positive alignment for molds with interlocking cavities and cores.
Side locks are typically machined on the centerline axis, both vertically and horizontally on the outside of the mold.
Mold Side Lock – DGMF Mold Clamps Co., Ltd is the supplier of Side Lock for Mold.
Side Locks at Mold ensure positive alignment between the top and bottom halves of the mold when the utmost accuracy is required.
Side Lock for Mold is widely used in various industrial applications.
They are fixed on the external part of the Mold where very high alignments/accuracy of mold is required.
It ensures positive alignment between the Top & Bottom halves of the Mold. They are hardened & ground on a very high precession surface grinder with close tolerance.
Mold Side Lock Features
Accurate alignment of mold halves
Easy installation
Industry-compatible sizes
Mold Top Lock
These components are used for precision alignment of the upper and lower portion of a mold. Top locks consist of two pieces: a male made of black oxide-coated O6 hardened to 60-62 Rc and a female made of TIN-coated S7 hardened to 50-52 Rc.
Top locks are typically machined on the centerline axis, both vertically and horizontally from the face of the mold. Top locks should be machined at the same time as the leader pins and bushings to ensure parallelism and proper location relative to the leader pins.
Standard Top Locks Like side locks, these provide a lock-up location to overcome injection melt pressures with a small degree of engagement protection.
Top locks are typically machined on the centerline axis, both vertically and horizontally from the face of the mold. Top locks should be machined at the same time as the leader pins and bushings to ensure parallelism and proper location relative to the leader pins.
Unlike side locks, top locks are machined in two separate setups, requiring a high degree of machining precision.
Taper block set
The main features of our taper lock set
1. After surface treatment, the taper lock surface will have high hardness, wear resistance, corrosion resistance. Exceptionally good internal low hardness, toughness, suitable for high-temperature operation environment of the mold.
2. With the features of high hardness, good toughness, wear-resistance, and excellent heat resistance, such taper lock pin is munch suitable for precision mold, can significantly increase its service life, especially the thermal deformation of precision mold has been effectively controlled.
3. Using high-frequency quenching process, precision grinding processing, good wear resistance, high positioning accuracy. The locating piece is suitable for hot hard resin products’ high-temperature operation.
4. It is capable of preventing wear and damage in core pins since it can be positioned before core pins are inlayed.
Material SUJ2, YK30
Heat Treatment Vacuum treatment
Hardness 53~58 HRC
Types of taper lock
Straight taper block set PLK type, round taper block set, KY taper lock,
Taper lock function
Accurate the location of the mold or imported agency will accurately locate the core when moving to die, fixed die and compound die, can reduce the internal parts and mold wear and bruise can more accurately control the quality of injection products, extend the life of the mold, improve the efficiency of the whole production, create great value.
X-series lock for mold
The X series lock is a .shuttle mold set mold component for injection molding
The X series side lock for mold provides positive alignment between three adjacent plates when the mold has two parting line openings. This design can be used to provide close alignment for interlock cavities and cores in stripper plates or floating plate type molds.
Standard: DIN metric standard and America standard.
Hardness: 56-60HRC.
Heat Treatment: Vacuum treatment
The X-series side lock is with awesome wear-resistant and corrosion-resistant characters, a long usage lifespan, and high-temperature resistance.
With perfect tolerance and can be excellently fitted with the plastic mold when correctly install and function.
Square guide bar
Hasco standard Mold Component Square Guide Bar Zz07 / Zz17
Square Guide Bar component for injection mold positioning
Material: SKD11 or YK30,
Hardness: 55-60HRC;
Styles
HASCO square guide bar Z07/Z17/22/16*20
HASCO square guide bar Z07/Z17/22/16*40
HASCO square guide bar Z07/Z17/27/20*25
HASCO square guide bar Z07/Z17/27/20*50
HASCO square guide bar Z07/Z17/36/25*32
HASCO square guide bar Z07/Z17/36/25*63
HASCO square guide bar Z07/Z17/46/32*40
HASCO square guide bar Z07/Z17/46/32*80
HASCO square guide bar Z07/Z17/56/40*50
HASCO square guide bar Z07/Z17/56/40*100
HASCO square guide bar Z07/Z17/66/50*56
HASCO square guide bar Z07/Z17/66/50*112
Square guide bar product description:
1. Square guide bar, also called square side lock, auxiliary device, precise positioning guide bar.
2. It is installed on the side surface of the mold, which is extremely convenient for loading and unloading, and the installation hole (groove) on the template is easy to process.
3. The precise positioning or introduction mechanism of the mold can position the core when the movable mold and the fixed mold are closed, which can reduce the wear and tear of internal parts and cavity, and can control the quality of injection products, and extend the life of the mold. , Improve overall production efficiency and create huge value.
4. Note that because the gap between the positioning blocks is extremely small, in order to avoid collisions during mold clamping, it needs to be used in conjunction with precision guide bushings, and the gap between the convex and concave blocks of the square guide bar is relatively small.
Please pay attention to the processing and arrangement. Used for the positioning of precision molds such as connectors and electronic components.
Pre-centering unit
Product name: Pre-centering unit, one of the positioning blocks, precise positioning, side lock, straight positioning lock, auxiliary device, top lock, positioning slider, interlock, positioning component.
Pre-centering unit Product mode
Hasco precision Pre-centering unit z08/20-20 z08/25-25 z08/32-32 z08/40-40
Pre-centering unit Product description
The precise positioning Pre-centering unit or introduction mechanism of the mold can accurately position the core when the movable mold and the fixed mold are closed, which can reduce internal parts and cavity wear and tear, and can more accurately control the quality of injection products extend the life of the mold, improve the overall production efficiency, and create huge value.
Square positioning block Pre-centering unit, also called side lock Pre-centering unit, auxiliary device, precise positioning Pre-centering unit.
Material: skd11 or yk30,
Hardness: 55-62hrc;
It is installed on the side surface of the mold, which is extremely convenient for loading and unloading, and the mounting hole (groove) on the template is easy to process.
Note
Due to the extremely small gap between the positioning blocks, in order to avoid collisions during mold clamping, it needs to be used in conjunction with precision guide bushings, and the gap between the convex and concave blocks of the square positioning block is relatively small.
Please pay attention to the processing and arrangement when using it. Used for the positioning of precision molds such as connectors and electronic components.
Slide retainer
Slide Retainer products are generally used to hold slides in a mold when the mold design requires a moving core. Slide Retainers help to facilitate accurate and proper movement within the mold.
The sliding retainer is a sturdy and compact product able to guarantee high loading performance and high longevity. The locking is performed with rollers aimed at minimizing wear, the special design allows for setting the locking position.
Slide retainer features
Slide retainer SLLK product features
1. This limit clamp Slide retainer is mainly used for large behavior agencies;
2. The surface contact design is adopted, which reduces the unit pressure of the contact surface, thereby effectively preventing damage to the travel mechanism;
Features of slide retainer RM
1. Simple structure and convenient installation;
2. The load of the slide retainer can be increased by increasing the number of clamps, which can delay the separation and closing of the mold.
Slide retainer RC product features
1. High-quality spring steel;
2. The structure is simple and practical, and the installation space is small.
Slide retainer SRT (British) product features
1. Compared with other Slide retainers, it is not easy to damage the slider of the travel mechanism;
2. The positioning part is a ball structure, which reduces friction compared to a sliding structure; the slider slides smoothly;
Slide retainer SRT/SRTM product features
1. Rugged and durable, precise design;
2. Small size, strong and durable;
Slide retainer SLK-25(50)A product features
1. This product is easy to install into the mold base slider, and is cleverly hidden in the limit decoration;
2. Compared with SLK-8A, its external dimensions are more reasonable. The 90° limit hanging platform is lengthened, which increases its load force and makes the limit more balanced and stable.
Slide retainer SLK-8A product features
1. This product is the smallest in the limited position clamp, which can make full and reasonable use of space;
2. Equipped with a cover plate to make the sliding block and the slide retainer more precise;
3. It can effectively prevent the gradual loosening of the slider;
4. High hardness material, sturdy and durable, long life.
Features of Slide retainer Z5140
1. Compared with the Slide retainer SLK series, the spring adopts a built-in type, which is more convenient to install;
2. Compared with the Slide retainer Z5130 series, the 90° limit hanging table is lengthened to make the limit more balanced and stable.
Features of Slide retainer Z5130
1. Integrated design, easy to install;
2. When using this product, you must design and process the V groove on the row template;
3. When processing the mounting screw hole position, it must be at right angles to the hanging table position for maximum effect.
Slide retainer PSR product features
1. The installation is simple, it needs to be equipped with a V slot when applicable, which takes up a small space;
2. It is simple and economical, and strong and durable. It can reach a larger load by increasing the number of products.
Features of Slide retainer Z189
1. Alloy steel precision casting;
2: Metric standard
Slide retainer MRT product features
1. Alloy precision casting;
2. The pin and jade clamping positions must be concentric during installation;
3. And the Slide retainer screw must not be installed on the main body to lock;
4. Must leave room for activity
Slide retainer PSM PSL product features
1. Precision alloy casting, strong and durable;
2. Slide retainer PSL is in the British system, which can adapt to customer requirements in different countries;
3. It can be used as a clamping buckle when there is no requirement for the clamping sequence;
4. Over-travel design effectively prevents damage caused by inaccurate stroke processing (setting).
Slide retainer series
DME, DME-EOC Slide retainer
PSL0001,
PSM0001,
PSL0002,
PSM0002,
PSL0003,
PSM0003,
PSR1000,
PSR2000,
PSR4000,
DME, DME-EOC Slide retainer
MRT 10M,
MRT 20M,
MRT 40M,
SUPERIOR Slide retainer
SLK-8A,
SLK-08A,
SLK-25A,
SLK-50A,
ZST-08,
ZST-25,
ZST-50
STRACK Slide retainer
Z5130-13,
Z5130-18,
Z5130-27,
Z5134-7,
Z5134-10,
Z5134-15,
Z5135-1,
Z5135-2,
Z5136-1,
Z5136-2,
Z5140-0,
Z5140-1,
Z5140-2
HALES Slide retainer
MTR 10M,
MTR20M,
MTR40M
PCS Slide retainer
SRP-22,
SRP-44,
SRP-88,
RC.123006,
RC.164008,
RC.205010,
RC.246012,
RC.328012,
RC.328016,
RM.651608
DMS Slide retainer
SRP-22,
SRP-44,
SRP-88,
NATIONAL Slide retainer
SRP-22,
SRP-44,
SRP-88,
CHOICE Slide retainer
SRP44,
SRP88,
HASCO Slide retainer
Z189/10,
Z189/12,
Z189/16
MEUSBURGER Slide retainer
E3044/8,
E3044/12,
E3044/16,
E3046/13,
E3046/18,
E3046/27,
E3048/18/53,
CUMSA Slide retainer
RC.123006,
RC.164008,
RC.205010,
RC.246012,
RC.328012,
RC.328016,
RM.651608
MISUMI Slide retainer
SRCU12-5;
SRCU16-6;
SRCU20-8;
SRCU24-10;
SRCU32-12;
SRCU32-16;
SLLK16-C;
SLLK16-F;
SLLK20-F;
SLLK20-L;
SRPR16;
SRPR19;
SRPR22;
SRPRH16;
SRPRH19;
SRPRH22;
HALES Slide retainer
RC.123006,
RC.164008,
RC.205010,
RC.246012,
RC328012,
RC.328016,
RM.651608
PROGRESSIVE Slide retainer
SRT-10,
SRTC-10,
SRT-30,
SRTC-30,
SRT-80,
SRTC-80,
SRTM-04,
SRTMC-04,
SRTM-13,
SRTMC-13,
SRTM-36,
SRTMC-36,
RET- 1
WEMA Slide retainer
RCR-10,
RCR-20,
RCR-40,
DGMF Mold Clamps Co., Ltd’s Slide Retainers are compact and provide positive acting slide retention. Slide Retainers are installed behind or below the slide which eliminates interference with machine tie bars. Multiple units can be used together to provide retention for larger slides.
Compact, economical, and positive acting slide retention
Can be installed in new molds or retrofitted to existing molds
Installed behind or below the slide, eliminating interference with machine tie bars or safety gates
Multiple units can be used for large or heavy slides
DGMF Mold Clamps Co., Ltd manufactures the mold clamps, and supplies the injection mold components, such as Clamps, Toggle Clamps, C Clamps, Pins, Bushings, Positioning Components, Lock Mold Components, Reset Extrusion, Cavity, and Core Components, Coolings, Die Press Components, Punch And Die, Guide Components, Self-lubricating Components, Springs, Machine Tools, Machine Mounts, gate valves, Vises, Fasteners, Lifting, Bolts, Nuts, Washers, etc.
Contact the DGMF Mold Clamps teams for more details about the Positioning Components such as Positioning Components specifications, Positioning Components pricing, Positioning Components inventory, etc.
Showing all 6 results