DGMF Mold Parting Locks

What are Mold Parting Locks?

Mold Parting lock is also called nylon mold clamp, resin shutter, nylon mold lock, resin mold clamp, nylon resin shutter, etc. By locking the tapered bolts, the mold component adjusts the friction between the template and the nylon sleeve.

The mold parting locks are a part that adjusts the friction between the mold plate and the nylon sleeve by locking the conical bolt supplied by DGMF Mold Clamps Co., Ltd.

DGMF Mold Parting Locks Features

High-temperature resistance

Wear-resistant

Easy to dismantle

High-quality resin plug screws

Strict tolerance size guarantee

Precise straightening to ensure concentricity and perpendicularity.

Hard texture

Durable

Strong pulling force

High hardness, not easy to break

etc.

DGMF Plastic Mold Parting Lock Sets Specifications

The Mold Components Parting Locks’ Drawing

The Mold Parting Locks Mounting Method and Attention

1. Insert the resin sleeve into the movable side of the template approximately 3 mm.
2. Create a hole in the fixed side of the template and complete it to reduce the internal surface roughness.
3. To maintain the durability of the mold parting lock, perform R chamfering on the entrance edge instead of C chamfering. If not the life cycle will shorten.
4. PLBS bushings specifically designed for use with this split lock help to replace the R chamfer and surface finish process. The tapered bolt of this mold opening controller can be tightened or loosened to adjust the tension.
5. Place the Parting lock bolt on moving the side of the mold Install min 4 nos. on one mold of 2 nos. each on both sides of the plate After placement of the Parting locks on the plate, turn the bolt to 90° and the plastic lock will expand
6. Injection Mold weight <100kg using 4 pieces of 12Ø,

Injection Mold weight < 500kg, using 4 pieces of 16Ø,

Injection Mold weight <1,000kg using 4 pieces of 20Ø,

Injection Mold weight >1,000kg, using at least 6 pieces.

If more load is to be pulled than the above limit, more numbers of Parting locks will be used. i.e. 6 or 8nos

7. Do not apply any lubricant on the plastic part. Doing so will reduce the friction and grip

DGMF Mold Parting Locks Feature and Structure

1. Material: Nylon Resin strength alloy steel, JIS standard.
2. Easy to assemble and disassemble.
3. Can also be installed into small, medium-sized, and 2-sectional injecting metal pipes or can be installed on sliding bases.
4. Do not add oil and grease on parting locks, Or else the friction will reduce.
5. Package: Small packed in box 10 pieces.

DGMF Mold Parting Locks Views

High-Precision Injection Molding Components Supplier