Description
What are Cooling Circuit Plugs For Injection Mold Cooling?
The cooling circuit plugs are metal parts that are used in plastic molds or any waterway cooling or heating system to match the required flow direction to play a role in filling.
The injection mold components cooling circuit plugs are provided by DGMF Mold Clamps Co., Ltd. for mold cooling system application.
DGMF Injection Mold Cooling Circuit Plugs Features
The cooling circuit plug is used by the required flow direction to play the role of the filler
The cooling circuit plug can be adjusted to the desired tightness without the need for a stopcock.
It can be moved freely and placed in any position in the waterway.
As the water is heated, the water is also heated, good thermal conductivity, oil, and other heating and cooling are also the same reason.
Any specifications of the mold hole diameter should be 0.1mm larger than the hydrant outside diameter
If the cooling circuit plug is not positioned in the waterway, it can be relaxed first and then sprayed out with an air gun to reposition it.
This cooling circuit plug, the material for the national standard brass, 0-ring material has a red silicone o-ring / black rubber ring optional.
Red o-ring: The material is silicone, softer, better high-temperature resistance. (Recommended)
Black ring: The material is rubber, slightly hard, strong corrosion resistant, and suitable for oil and other special media.
DGMF Mold Cooling Circuit plug drawing and specifications
The scope of application of the cooling circuit plugs
Plastic mold, water channel cooling system, channel water heating, and heat conduction system. Water stop, flow channel, and water channel heating and heat conduction system.
- The cooling circuit plug expands the O-ring and the shrapnel to fill the role.
- The elasticity can be adjusted at will, no antidiarrheal belt is needed;
- It can be moved at will and placed in any position in the water channel;
- As the water is heated, the water is also heated, and the thermal conductivity is good, and the heating and cooling of the oil is the same;
Endurance of cooling circuit plug
The diameter is 8mm or more than 16KG/square centimeters;
Diameter 10mm or more than 17KG/square centimeter;
Diameter 12mm above 19 kg/square centimeter.
Precautions for the use of the cooling circuit plug
- The aperture of any specification mold should be 0.1mm larger than the outer diameter of the stopcock;
Example: 8mm (outer diameter) cooling circuit plug, its mold hole should be 8.1mm
- If the water stop plug is not positioned in the waterway, you can relax it first, and then spray it with an air gun to reposition it.
Working environment: general temperature -5℃~+135℃
The working temperature of the special cooling circuit plug: -10℃~+280℃
Views of DGMF Cooling Circuit Plugs For Injection Mold Cooling
Reviews
There are no reviews yet.