185 Injection Moulding Die Design Experiences
185 injection moulding die design experiences are precious information! Worth collecting. The 1 to 10 injection moulding die design experiences The height of the slider guide should be at least 1/3 of the slider height to ensure the stability of the slider and smooth sliding. Sliding friction positions attention to the open lubrication groove, to prevent the flow […]
85 FAQs of TPM Management
There are 85 FAQs of knowledge about TPM management, here we go! 1. What is TPM management? A: In terms of management, TPM (Total Productive Maintenance) is an activity to improve the overall efficiency of a company’s equipment. TPM (Total Productive Maintenance) is an activity of equipment maintenance and repair based on the prevention and maintenance […]
What is T-slot Bed Plate?
The T-slot bed plate, also called the T-slotted plate, is a kind of cast iron plate with a T-slotted surface used for assembly, debugging machinery, and equipment. Cast iron T-slotted bed plate table and scribing platform strictly implement the relevant national industry standards, using high-strength cast iron casting that is not only stable and accurate but durable. […]
What is a Permanent Magnetic Chuck?
A permanent magnetic chuck, also known as a magnetic chuck, is a magnetic fixture widely used in machine shops, mold factories, and other machining fields, which can greatly improve the clamping efficiency of magnetic steel materials. Permanent magnetic chucks are modern devices that replace vices, mechanical clamps, and fixtures. Using electromagnetic, electro-permanent, and permanent magnetic chucks for clamping and unclamping […]
What is an Indexing Head?
An indexing head, also known as a dividing head or spiral head, is a specialized tool that allows a workpiece to be circularly indexed. The indexing dividing head for the milling machine is a machine tool accessory installed on the milling machine to divide the workpiece into arbitrary parts. What are the applications of the indexing head? A machine […]
Top 10 Fixture Clamp Types In The Machining
The article talks about the top ten fixture clamps commonly used in the machining industry. Why fixture clamp is so important? Fixture clamps offer a wide assortment of style clamps that are adaptable to different industrial applications and systems. Machining applications require the right tools and equipment to get the best results. If you lack the right equipment, you […]
What is Double-Color Injection Molding?
What is the double-color injection molding process? A double-color injection molding is a molding process in which two plastic materials are injected into the same injection molding machine and molded twice, but the product only comes out of the mold once. Double-color injection molding process also called two-color injection molding 2 color injection molding, is usually done by a set […]
30 Two-color Injection Molding Technical Info
If you know the 30 technical information on the two-color injection molding, the injection molding process will be done in helpful. What is two-color injection molding? Two-color injection molding is two kinds of plastic materials injected into the same injection molding machine, and the products are molded twice, but the products only come out of the mold once. […]
What Causes Sink Marks in Injection Molded Parts?
After the read, you will learn: What is the Sink Mark? What is the sink mark in injection molding? How do sink marks form? Why does the sink mark of injection molded parts of products occur? What are the reasons for the sink mark of the injection molding machines? What causes the sink mark of injection molded parts? What […]
18 Plastic Injection Molding Basics You Must Know
18 plastic injection molding basics that injection molding process personnel must know, do you know them all? Plastic injection molding basics 1. Injection nozzle The molten rubber usually flows from the nozzle into the injection port, but in some injection molds, the nozzle is part of the injection mold because it extends to the bottom of the injection […]