7 Overlooked Aspects Of Injection Mold Maintenance
The 7 overlooked aspects of injection mold maintenance The maintenance procedures required for each injection molding location depend on different injection mold cycle cycles. The following are some general principles that each injection mold user can use to ensure the effective operation of injection mold components such as hot runners, heaters, guideposts, and thimbles to […]
Die-Casting Mold VS Plastic Injection Mold
Die-casting mold vs plastic injection mold, what is the difference? What is the difference between die casting mold and plastic mold? The injection molding pressure of the die-casting mold is larger, so the template needs to be relatively thick to prevent deformation The gate of the die-casting mold is different from the plastic injection mold, […]
How To Change The Color On Hot Runner?
Any plastic injection mold manufacturer that needs frequent color changes will consider using color change technology. If the high-volume hot runner system does not have a quick color change function, it will increase the cost of thousands of dollars every year. According to the number of such injection molds, the annual cost increase can reach […]
How Does The Mold Temperature Affect The Product?
How does the mold temperature affect the products? In our usual production process, when some products are relatively small and the requirements are not very high, it does not seem to have much effect if no cooling water is connected. For example, the plastic injection mold is cracked, and the cracked place happens to have […]
Structural Design Of Injection Mold For Concave Inner Shell
What is the structural design of injection mold for concave inner shell? Through the structural analysis of the plastic injection molded parts of the internal undercut shell, determine the mold parting and demoulding scheme. The ejection scheme of the shell adopts the principle of the shrinking core, and the solution of using the second ejection […]
Is The Mold Clamp In The Tools Design A Standard Part?
Do you think, is the mold clamp in the tools design a standard part? And why or why not? A mold clamp in the tools design a standard part According to the Machine Tools Design Manual, the mold clamp in the design of the tool is a standard part. Standard parts refer to the common […]
What Are Pre-Molding Action And Back Pressure Control For Injection Molding？
What are pre-molding action and back pressure control for injection molding you know? The pre-molding action and back pressure control for injection molding Choice of pre-plastic action According to whether the plastic molding injection seats of the front and back of the pre-plastic feeding are retracted, that is, whether the nozzle leaves the injection mold, […]
What Are The Design Standards For Injection Stack Molds?
Before knowing what are the design standards for injection stack molds. We should learn about what is a stack mold. What is injection stack mold? Plastic injection stack molds are also called injection stacked molds. There are two ways of mold non-rotation and mold rotation. There are two main types of rotary mold technology: turntable […]
What Are The Processes Of Injection Mold Design?
There are the 6 processes of injection mold design In general, the injection mold design has the following six main overall design processes. The processes of injection mold design step 1: The first thing to consider is the analysis of finished plastic drawings and real samples. At this point, we have to consider the […]
What Is A Die-Casting Mold?
Do you what Is a die-casting mold? Die-casting mold is a tool for casting metal parts, a tool for completing the die-casting process on die-casting die forging machine. The basic process of die casting is: the molten metal is firstly cast into the cavity of the mold at low or high speed, and the mold […]