- 86-17322110281
- [email protected]
- No.51 of Xida Rd Changan, Dongguan, China
Angle Pins are supplied with a pre-machined spherical radius on the head to eliminate the need for angle grinding usually required on the pinhead.
Angle pins and angle pin inserts are used to actuate sliding core blocks and are often used in conjunction with a form of core slide retainer.
Name: Precision round head angle pin
Hardness: 58-62HRC
Material: SUJ2
Diameter: 10/12/14/16/20/25/30
Length: 50-350mm
| Molde Number | k | l4 | l3 | l1 | d4 | d2 | d1 | l |
| DGMF-MOLD-CLAMPS-MAP | 3 | 12 | 8 | 4 | 10 | M4 | 8 | 60-240 |
| 3 | 15 | 10 | 4 | 12 | M5 | 9 | ||
| 6 | 17 | 12 | 7 | 16 | M6 | 12 | ||
| 8 | 17 | 12 | 7 | 18 | M6 | 14 | ||
| 8 | 22 | 16 | 7 | 18 | M8 | 15 | ||
| 8 | 22 | 16 | 7 | 20 | M8 | 16 | ||
| 8 | 27 | 20 | 7 | 22 | M10 | 18 | ||
| 8 | 27 | 20 | 7 | 24 | M10 | 20 | ||
| 15 | 27 | 20 | 7 | 26 | M10 | 22 | ||
| 15 | 27 | 20 | 7 | 28 | M12 | 24 | ||
| 15 | 32 | 24 | 7 | 28 | M12 | 24 | ||
| 15 | 41 | 32 | 7 | 36 | M16 | 30 | ||
| 15 | 41 | 32 | 7 | 36 | M16 | 32 | ||
| 15 | 41 | 32 | 10 | 40 | M16 | 40 | ||
| 15 | 41 | 32 | 10 | 40 | M16 | 50 |
TO ORDER SPECIFY: DG MF-034-D-L-(d2)
The angle pin column acts as a guide, used for the molds with oblique demolding, In order to separate off the core in the form of a side core, The mold angle pin of SUJ2 steel, and then can also be used as a straight leader pin.
Notes:
* The diameter dimension specified for the hole will provide approximately .000 to .001 clearance with the “P” diameter to a press-fit area of the pins. Moldmaker to adjust “D” diameter hole dimensions to obtain the specific fit required.
Cut the angle pin to length as required to achieve the desired travel on the slide. Typically, a spherical radius or cone shape with a spherical radius is machined on the end of the angle pin (opposite the head)
The spherical radius on the head is suitable for angles up to and including 20 degrees.
