DGMF Parting Line Sequence Control Two-stage Ejectors

Description

What are Two-stage Ejectors?

Parting Line Sequence Control Two-stage ejectors are used where two ejection sequences are required, for example, to demould undercuts with inclined cores, or to ensure that slides do not collide with ejector pins.

The Parting Line Sequence Control Two-stage Ejectors with many styles are supplied by DGMF Mold Clamps Co., Ltd. Contact us for more details.

 

Two-stage Ejectors Product Description

The two-stage ejecting structure is a structure in which it is possible to carry out the ejecting operation twice at the time of ejecting the molded article from the core.

Although ejection is done only once in the usual injection mold, since in the case of the two-stage ejecting structure it is possible inside the mold to carry out ejection two times with a time gap between them, this is a mechanism that is very convenient in cases in which the molded item cannot be taken out the mold with only one ejecting operation.

A two-stage ejector, It offers a variety of individual possibilities for reliable motion control and molding during the injection molding process. All two-stage ejectors are now available with DLC-coated functional surfaces.

The high layer hardness and low friction values of the coated two-stage ejectors significantly improve the life of the mold and thus make a major contribution to increasing productivity and lowering costs in the production process.

The Z169/Z1691/Z1692/Z1695… two-stage ejectors are the classic solution for activating a stripper plate. Automatic and precise holding and opening mechanisms allow independent movement between two plates. The accurate movements guarantee consistent part quality without compromise.

 

Two-stage ejector features

1. Interlocking mechanism design, safe and reliable;
2. This secondary ejection mechanism is simple in structure and convenient in installation and needs minimal installation space;
3. Important parts are made of SKD11 materials and adopt the high-quality heat treatment process, being more wear-resistant;
4. The surface with coating treatment and higher wear resistance creates a longer lifespan.

It is convenient for installing processing machinery interlocking design so that it is safe and reliable. The installation stroke needs to be calculated accurately. Otherwise, the product is likely to be damaged. Select appropriate specifications according to the load requirement of the die.

 

 

 

Type 1: Z169 two-stage Ejector

The Z169 two-stage ejector is the classic solution for activating a stripper plate. Automatic and precise holding and opening mechanisms allow independent movement between two plates. The accurate movements guarantee consistent part quality without compromise.

Z169 Two-Stage Ejector

 

 

 

 

 

Z169 two-stage Ejector Drawing

 

 

 

 

 

DGMF Z169 Two-stage Ejector Series Specifications

DGMF Z169 Two-stage Ejector Series Specs
SKU	Sw3	Sw2	Sw1	k2	k1	d4	d5	I7	I6	I5	I4	I3	I2	I1	d2	d3	H1		H2		d1
																	min	max	min	max
DGMF-MOLD-CLAMPS-EM-Z169/16	20	28	13	8	5	30	20	11	9	11	26	56	112	164	M22X1	M32X1.5	5	30	3	50	16
DGMF-MOLD-CLAMPS-EM-Z169/22	27	38	17	10	6	40	28	12		16	36	75	148	220	M30X1.5	M42X1.5	6	40	4	70	22
DGMF-MOLD-CLAMPS-EM-Z169/30	38	55	24		7	50	38	13	11	21	45	80	170	255	M60X1.5	M60X1.5	7	50			30
DGMF-MOLD-CLAMPS-EM-Z169/40	46	65	32	14	8	65	50	14	12	22		98	200	270	M70X1.5	M70X1.5	7.5	60	5	80	40

 

 

 

 

Z169 Two-stage Ejector Installation

 

 

 

 

 

The Z1691 two-stage ejector is an extension of the classic Z169. It offers the same motions plus improved locking. One advantage is the simple assembly through the integrated flange attachment. Specially designed centering rings allow particularly smooth axial motion and ensure high service life. Available with a shaft diameter of 13-52 mm, it can be used in small to large molds.

Z1691 Two-Stage Ejector

 

 

 

 

 

Z1691 Two-stage Ejector Drawing and Specifications

 

 

 

 

 

DGMF Two-stage Ejector Z1691 Flange Specifications

DGMF Two-stage Ejector Z1691 Flange Specs
SKU	Sw1	Sw2	Sw3	d2	d3	d5	d6	d9	d11	d12	d13	d14	b1	I1	I2	I3	I4	I5	I6	I7	I9	H1 (min-max)	H2 max	d1
																									DGMF-MOLD-CLAMPS-EM-Z1691/13	10	10	17	M20X1	M28X1.5	18.5	50	41.6	M8X0.75	13.4	17.6	4.3	3.2	164	72	38.8	21	9	4	2.6	22	3━20	44	13
DGMF-MOLD-CLAMPS-EM-Z1691/17	13	12	21	M24X1.5	M35X1.25	22	60	48	M11X1	17.4	22	5.4	4	228	110	63	12	5	3.5	25	4━30	65	17
DGMF-MOLD-CLAMPS-EM-Z1691/22	17	17	27	M30X1.5	M45X1.5	28	75	61	M14X1	21	27	6.5	5	270	131	74	17	17	6	4	30	6━42	80	22
DGMF-MOLD-CLAMPS-EM-Z1691/30	24	22	36	M40X1.5	M60X1.5	38	100	82	M18X1	26	33	8.8	6	340	166	89	27		7	5	38	10━60	95	30
DGMF-MOLD-CLAMPS-EM-Z1691/40	32	32	46	M55X1.5	M75X1.5	52	125	104	M25X1.5	35	43	11	8	470	232	122	41	27	10	7	50	14━86	130	40
DGMF-MOLD-CLAMPS-EM-Z1691/52	41	41	56	M72X1.5	M98X2	69	150	128	M34X1.5	48	58	11	9	583	295	155	51	27	15	11	60	18━110	180	52

 

 

 

 

 

Z1691 Two-stage Ejector Installation

 

 

 

 

 

Type 3: Z1692 two-stage Ejector

The Z1692 two-stage ejector is developed for demoulding processes in which the first and second stroke has to function completely separately from one another. The stroke can be subsequently modified or it can be preset to your requirements directly ex works.

 

Z1692 Two-Stage Ejector

 

 

 

 

 

Z1692 Two-stage Ejector Drawing

 

 

 

 

 

DGMF Z1692 Two-stage Ejector Specifications

DGMF Z1692 Two-stage Ejector Specs
SKU	Sw4	Sw2	Sw1	I10	I9	I8	I7	I6	I5	I4	I2	I1	d13	d12	d10	d9	d7	d6	d5	d4	d3	d2	H2 (min-max)	d1	H1 (min-max)
DGMF-MOLD-CLAMPS-EM-Z1692/25X45	38	50.2	32	16	10	53	14	71	58	17	155	260	81	5.4	M16	37	45	70	93	69	M48X1.5	M14X1	4━45	25	4━45
DGMF-MOLD-CLAMPS-EM-Z1692/32X60	46	60.2	41	25	12	68	15	89	68	17	198	325	95	6.4	M16	46	55	82	110	80	M58X1.5	M18X1	5━60	32	6━60
DGMF-MOLD-CLAMPS-EM-Z1692/40X80	65	80.2	50	24	14	90	18	116	90	22	258	471	123	8.5	M24	56	73	108	140	106	M76X1.5	M24X1.5	6━80	40	8━80

 

 

 

 

 

Z1692 Two-stage Ejector Installation

 

 

 

 

Type 4: Z1695 two-stage Ejector

Z1695 two-stage ejector is suitable for controlled plate movement during demoulding with an inclined sliding carriage. The precision movement of the first stage prevents stressing of the part. Subsequent opening of the rear stage allows the ejection of the part at a precise predefined position.

 

Z1695 Two-stage Ejector

 

 

 

 

 

Z1695 Two-stage Ejector Drawing

 

 

 

 

 

DGMF Z1695 Two-stage Ejector Specifications

DGMF Z1695 Two-stage Ejector Specs
SKU	k2	k1	Sw3	Sw2	Sw1	I9	I8	I6	I5	I4	I3	I2	I1	H2		H1		d7	d6	d5	d4	d3	d2	d1
														min	max	min	max
DGMF-MOLD-CLAMPS-EM-Z1695/22	18	6	36	46	17	10	52	58	17	175	82	141	278	6	48	4	36	9	50	31.5	52	M52X1.5	M40X1.5	22
DGMF-MOLD-CLAMPS-EM-Z1695/25		7	41	55	19		60	66		207	89	163	329	8	60	5	50		56	36	60	M60X1.5	M45X1.5	25
DGMF-MOLD-CLAMPS-EM-Z1695/32	16	8	50	65	27	12	82	102	22	257	106	196	430	10	86	6	60	11	70	44	72	M72X1.5	M55X1.5	32

 

 

 

 

 

Z1695 Two-stage Ejector Installations

Z1695 two-stage ejector is designed for applications in which a central ejector cannot be used.

Because of the lubricant-free functional surfaces, the maintenance intervals are longer. Applications in medical and food technology are possible, as are parts that subsequently have to be painted or lacquered.

The high layer hardness and low friction values of the coated two-stage ejectors significantly improve the life of the mold and thus make a major contribution to increasing productivity and lowering costs in the production process.

 

 

 

 

 

 

Type 5: Z1697 two-stage Ejector

The two-stage ejector Z1697 machinery interlocking design makes the structure much simpler and installation more convenient compared with other second ejection series.

 

DGMF Two-stage Ejector Z1697 Specifications

DGMF Z1697 Two-stage Ejector Specs
SKU	Sw1	k2	k1	I6	I5	I4	I3	I2	I1	d7	d6	d5	d4	H2		H1		d3	d2	d1
														min	max	min	max
DGMF-MOLD-CLAMPS-EM-Z1697/16	8	6	6	77	5	12	45	90	103	52	44	44	36	3	76	6	76	28	57	16
DGMF-MOLD-CLAMPS-EM-Z1697/20	10	7	7	101	6	17	59	100	134	59	51	51	43	4	96	8	96	34	32	20
DGMF-MOLD-CLAMPS-EM-Z1697/26	14	8	8	126	7	22	74	150	168	73	64	63	54	5	130	10	130	43	42	26

 

 

 

 

 

Z1697 Two-stage Ejector Installation

 

 

 

 

 

Z1697 Two-stage Ejector Drawing