Step Block Mold Clamps

Description

What is Step Block Mold Clamps?

Step block mold clamps are used for CNC milling machines commonly.

The stepped strap mold clamps provide support and quick height adjustment when paired with step blocks mold clamps. Use T-slot nuts or bolts to secure a workpiece to a machine table.

DGMF Mold Clamps Co., Ltd supplies step block mold clamps with corresponding mold clamps that use T-nuts and studs. This is a very practical way to solve one of the more difficult problems that come up in the machine trades; that is, clamping the step block mold clamps to the table.

Not much is required in the way of instructions in order to use these step bock mold clamps. The biggest problem you can create for yourself is over-tightening the nut and damaging the T-slots on your mill table. we supply both step block mold clamps and the stepped-strap mold clamps.

A good feature of this mold clamp set that you won’t find even in more expensive, full-size sets is the radiused nut and washer. They allow the nut to pull the washer down flat on the clamp even when it is slightly tilted.

The step block mold Clamping Kits reduce the set-up time needed on milling machines, boring mills, and other machine table operations.

Step Block Mold Clamps Specifications:

Step Blocks Mold Clamps two installation methods:

We also have the open-end mold clamp, closed-end mold clamp, quick-change mold clamp, universal mold clamp, easy clamp, stepped strap clamp, stamping die clamp, hold-down clamp, etc.

Contact the DGMF team for the mold clamp specification, inventory, datasheet, and pricing.